- Manufacturing of an average layer from separate
wood elements as rectangular prisms of the cubic
form or close to a cube, versatile of fibres of
insignificant extent, presence of set of surfaces
of the unit between separate elements -By prisms
with a mutually perpendicular arrangement of
fibres results: To braking development of forces
of a stretching and compression arising in
elements of volume filling of a layer under
influence of external environment(surround).
- Interferes with development and distribution of
deformation, both layer, and all board.
- Promotes preservation of stability of the form
and sizes of a board.
- Besides in an offered wood board the occurrence
of additional stabilizing effect is observed
which is provided with presence thin sticky of a
layer around of each separate element. At pasting
an average layer and board as a whole, sticky the
solution will penetrates and hardens in internal
cavities of crates, forming strong
"bridge" between stuck together
surfaces. The presence of this "bridge"
from different directions of separate elements
create an environment, which promotes
stabilization initial moisturizes of elements of
the basis of a board.
- The set of design features S- of a board allows
to guarantee its quality and durability, and
opportunity of use cheap, low quality of wood,
absence of difficult technological processes of
manufacture, - allow to receive maximal rate of
return by its manufacture.
- Area of application:
- S- The board can be used as an independent
product of manufacture in various updatings, or
as a making element - basis for manufacture of
various kinds of production wooden cultivation
and furniture manufacture.
- Now in conditions of experimental manufacture S-
the board is made and is tested as the basis
parquets of a board in manufacture art panel
board parquet. The results of tests have shown
stability of a board and absence of deformations
at cyclic influences of the adverse factors
(moisture - temperature). In photos (Pic.1-Pic.3)
is submitted ready parqueting a floor, with use
S- of a board.In furniture manufacture object of
manufacturing with use S - board can be tables:
kitchen , journal , lunch, or massive details of
furniture. In joiner's manufacture it there can
be door cloths, various lining boards and panels.
|
NOVELTY! The decision , that
doesn't have analogies.
